Page Comparison

...

1. Log in to the Croptracker app and select Warehouse Management from the dashboard.
2. Select the Device ↔ RFID Tag Linker option on the screen that appears.
3. Ensure your device's bluetooth is enabled, then drop down the menu in the top right corner and select Connect to RFID Reader.
4. If this is your first time connecting to the RFID knuckle reader, you'll be prompted to pair with it. The app will remember for selection for next time.
5. Once your device is paired with the RFID knuckle reader, point it at an RFID tag and press the yellow button on the top of the reader. The knuckle reader should beep, and any RFID tags it read will appear in the list on your device.
   1. Note: The knuckle reader is fairly sensitive and may read multiple nearby tags. If you're trying to target a specific tag, you may have to move to a more isolated area.
6. Wait a few seconds for the list to refresh against the server. Known tags will be displayed with their status, and unknown tags will be identified as "Unknown/Uninitialized".
7. To initialize a tag:
   1. Long tap on the list item
   2. Enter an identifier label (e.g. Tablet_3 or Forklift_1) then tap Ok.
   3. Wait for the list to refresh and your tag will be updated in the list with its new label and a status of Available.
8. Check off each tag that you want to link with the device, then tap Link Selected Tags.
9. The tags you checked off are now linked with your specific device in Croptracker.
10. To unlink a tag, long tap on the linked tag and tap Unlink in the confirmation dialog.

Related articles

...