| Info |
|---|
This document contains a how-to step by step guide on how to perform a Crop Load Vision Fruit Count Scan. You will need the Crop Load Vision module to access this feature. |
...
Begin by logging into the Croptracker app on your mobile device.
Select the Crop Load Vision module from the main page.
...
Choose “Pre-Harvest Fruit Count”.
Add a new event for your selected tree/area by selecting the “New Event” button at the bottom of the screen.
...
The crop load vision scanning screen will pop up.
Position yourself approximately 1-2ft away from the tree you’re scanning.
Point your device’s camera directly at your selected tree and allow a marker to tag itself to one of the fruit on the tree. Use the slider at the top of the screen to adjust the marker to the estimated fruit size.
...
Start the recording scanning near the bottom (trunk) of the tree. See example videos below:
https://youtu.be/FR_z7wPwRPI
https://youtu.be/xuGtsRxiB4cAngle the camera upwards in order to capture any hanging fruit that may be obstructed by branches or leaves.
Move the camera close to and around any fruit present on the tree, ensuring that the markers are appearing over top of the fruit you’re scanning. The fruit count can be found at the bottom of the screen.
...