Recording Pressure in Starch Quality Vision
- Emma Lavigne (Deactivated)
- Danny Williams (Deactivated)
This document contains a how-to step by step guide on how to record pressure readings in a Starch Quality Vision Event. You will need the Starch Quality Vision module to access this feature.
For more information on using this module see the main instructions page linked HERE
For more information on adding Starch Quality Vision to your Croptracker account contact support@croptracker.com
Ā Instructions
You will need to create a Starch Quality Vision Event before continuing. For detailed instructions on how to create an event, see How to Make an SQV Event.
1. From the Starch Quality Vision Events page, select the event you would like to add a pressure reading to. If you already have the event open, continue to step 2.
Ā
2. Ensure that the desired unit of measure has been selected. Under the āAdvancedā section tap on āUnitā to select a new unit of measure.
Ā
3. Scroll through the event details until you reach the Pressure section. Tap on āRecord Pressureā to record a new pressure reading.
Ā
4. This will take you to the Starch Quality Vision Event Pressure page. All the pressure readings for this event will be listed here. Tap on āAdd Newā at the bottom of the screen to add a new pressure reading.
Ā
5. Enter your pressure reading(s).
You are able to enter 1 or 2 numbers per pressure reading in the entry screen. The average of the numbers entered will be saved.
Ā
6. Tap in the grey area above to close the entry screen when finished. The Total Avg Pressure and Sample Size will be updated.
Ā
Total Avg Pressure: The average of all pressure averages.
Sample Size: The number of pressure readings taken.
Ā
7. Add more pressure readings by repeating steps 4-6 as needed.
Ā
Ā Related Articles
Ā